I had about 10 hours' time to work on my little boat while I was home. Not as much as I'd like, but I find it to be a better morning/early afternoon pastime, as that's pretty much the only time there is no real constraint on my time at home, and it keeps me from missing out on time with my family. Hopefully I'll have more time in the upcoming months, but who knows?
The little wooden rings will become portholes, and the blocks will become watertight doors. I simply glued little wedges of wood for the hinges, and then glued 1/4" nibs of plastic rod to the wedges to complete the look. Thankfully the rings were pre-cut and I just had to sand and smooth and paint them.
I attached the portholes with dressmakers' pins, which, when painted, will look like rivets, and glued them all, too, to firm everything up. I predrilled the holes with a 1/32" drill by hand so I wouldn't have to take a hammer to the wood.
Making the side ladders was a bitch. They're made from 1/16" round stock brass rod, cut to length and soldered together. After a couple hours of filing, they really looked nice, although this picture only shows them partially soldered together.
| before |
Unfortunately, after priming and painting, I then bent the ends of the ladder to shape without adequately supporting the brass, and little ladder rungs went flying. Boy wasn't I pissed. I had to soak the parts in xylene and start resoldering. I ran out of time and only got one soldered before it was time to clean up and pack my bags for another trip.
| ah, fuck. |
| priming the deck and bulwarks |
| upper house primed and trim completed. Portholes are painted and watertight doors installed. |
I topcoated the deck and lower house (I'm still not happy with the wheelhouse), as well as the fantail and bow raised platforms. The bulwarks and gunwales still have to get painted, and I'll do those in satin black to match the hull. The hatch you see in the main deck is still just roughed in place. That'll be a watertight access hatch to the motor, speed control and steering gear. There will be a motorcycle battery under the house, which comes off but is watertight when on.
My hands shake. Always have. Detail and fine work isn't always so easy for me, but I find that the focus and concentration and effort helps. Finding ways to prop my hands and rest them against something steadies them up considerably. All the same, I bet a person with steadier hands could work considerably faster and neater. By the time I'm done with this, I'll be able to do much better on the next one. Just figuring out how to repurpose everyday items to simulate boat parts is challenging enough on its' own.
Next time I'm home I'll be installing handrails on the lower house and railings and chains on the upper deck. Hopefully I'll get started on the davit for the lifeboat, too... and maybe the lifeboat, if there's time. That'll be a challenge in itself. The damn boat is getting big. It's 4 1/2 feet long, and takes up a fair amount of space. I've got a lot of detail work still to do.
