A satellite digital video recorder, or DVR, captures a satellite TV signal for storage on the internal hard drive and playback to a connected television. The signal passes through a coaxial cable connection to the DVR. Hooking up a security camera enables you to record an area under surveillance to the DVR, or simply monitor an area on a TV connected to the DVR without recording. Use a pair of coaxial cables with threaded RF couplers on the ends. Items you will need
2 coaxial cables TV or video monitor
Sponsored Link Security Camera SupplierMade-in-China.com China Supplier of Security Camera. High Quality, Competitive Price! Step 1
Switch off the security camera, DVR and TV or monitor. Step 2
Push on the connector at one end of a cable onto the camera's output port, which is usually on the back edge. Twist the metal ring on the cable clockwise to hold it on the camera. Step 3
Attach the other end to the input on the rear panel of your DVR. Step 4
Connect the second cable from the DVR's output to the RF input on the television set or monitor. Step 5
Turn on the power for the three components and tune the DVR to channel three or four, depending on the camera model. Step 6
Watch the monitor or TV to view the area under surveillance from the camera, or record video by pressing the DVR's record button.
Outstanding...
ReplyDeleteWe had a 2AE that did the same paint job on the Capt Downing. Good times.
ReplyDeleteA satellite digital video recorder, or DVR, captures a satellite TV signal for storage on the internal hard drive and playback to a connected television. The signal passes through a coaxial cable connection to the DVR. Hooking up a security camera enables you to record an area under surveillance to the DVR, or simply monitor an area on a TV connected to the DVR without recording. Use a pair of coaxial cables with threaded RF couplers on the ends.
ReplyDeleteItems you will need
2 coaxial cables
TV or video monitor
Sponsored Link
Security Camera SupplierMade-in-China.com
China Supplier of Security Camera. High Quality, Competitive Price!
Step 1
Switch off the security camera, DVR and TV or monitor.
Step 2
Push on the connector at one end of a cable onto the camera's output port, which is usually on the back edge. Twist the metal ring on the cable clockwise to hold it on the camera.
Step 3
Attach the other end to the input on the rear panel of your DVR.
Step 4
Connect the second cable from the DVR's output to the RF input on the television set or monitor.
Step 5
Turn on the power for the three components and tune the DVR to channel three or four, depending on the camera model.
Step 6
Watch the monitor or TV to view the area under surveillance from the camera, or record video by pressing the DVR's record button.